Printers
      Back to home
      1. Idealpos Help Guides
      2. Peripheral Setup
      3. Printers

      TP-100 SW 5 Character per line (print job width)

      TP-100 SW 5 Character per line (print job width)

      If customer is using IDPTP-100USE (TP-100) and the printer is not printing as wide as possible you can change dip switch number 5 turned to the ON position. Default is set to the OFF position. Changing will increase the print job width. This will set the character per line from 48 to 42. NOTE in Idealpos v7 user LK210 driver in network printers.

      Image of two print outs in the off and on position for switch 5: