How to connect the Verifone V660p to the Wifi Network & then configure in Idealpos.
Eftpos Terminal Setup
- Go to Settings > Network and Internet > Internet
- Select the local Wifi Network, enter password & click the tick to apply
- It is recommended that a static IP is assigned so that the device always utilises the same IP Address
- Click on the Network once connected it will display Connected along with the connectivity strength
- Click on the pencil in the top right
- Click Advanced Options
- Change the IP Settings from DHCP to be Static
- Assign IP Address, Gateway, DNS Settings
- You can check the IP details in the Network Details screen
Idealpos Setup
-
Check the system is Licensed for Oolio Pay AU/NZ
-
Go to Setup > POS Terminals
-
Select the EFTPOS Settings TAB
-
Set Eftpos Type to be Oolio Pay AUS/NZ Verifone
- Set the Host IP Address {IP Address of the Eftpos Terminal} & click Connect, once the link is established it should display CONNECTED in green.
-
If you go back in to the POS Terminal it will display additional details of the connected pinpad (Example below)
