NCR 7884 Scanner.
1.Install datalogic OPOS 1.14
\DL OPOS 1.14\DR9610762.msi
Next
I Agree, Next
Install Control Bjectss, Next
Next
Next
Close
2.Install NSR OPOS 2.1.2.0
\NCR OPOS 2.1.2.0\NCROPOS.exe
Run.exe
Next
Next
Install Onto a Workstation, Next
PC, Next
Install default profiles, Next
Complete Installation, next
Next
Install
Finish
3. Reboot
4. In registry delete HKLM\Software\OLEforRetail\Scanner\Magellan8200
5. Edit 7884.reg and enter the correct com port
"Port"="COM1 -> Port number: COM1 to COM20"
E.g. "Port"="COM3-> Port number: COM1 to COM20"
6. Import 7884.reg
7. Start POS and Select Barcode Scanner Type=PSC Magellan 8400
The 7884.reg file is for scanner programmed with 9600,7, O,1. These may also need to be changed in the reg file depending on how the scanner is programmed.
-Only tested on POS ready 2009 SP3.
Files @ \\ipss-file01\Shared\Common\Hardware Drivers\NCR7884